Proizvodnja Martini Gradnja

Čašice / Collars

Opis elementa

Prefabrikovane čašice i temeljne stope koje se izrađuju na licu mesta zajedno čine temelje samce za montažne stubove. Upotrebom prefabrikovanih čašica značajno se smanjuje vreme realizacije temelja samaca odnosno skraćuju se rokovi same izgradnje. Čašica se prethodno pozicionira na mršav beton a potom se uz prethodno polaganje odgovarajuće armature na licu mesta izlije temeljna stopa dimenzionisana shodno statičkom proračunu. Ukoliko je definisano da se kišnica sprovodi vertikalno kroz cevi u samim stubovima, na samoj čašici se ostavlja otvor za kišnicu. U zavisnosti od iznosa opterećenja i poprečnog preseka stubova proizvode se tri tipa čašica: S, M, XL prema karateristikam prikazanim u tabeli.

Description of elements

Prefabricated collars and footings that are made on the spot together form footings for precast columns. The use of prefabricated collars significantly reduces the time of implementation of single foundations and can make the construction deadlines shorter. The collars are positioned above the lean concrete and then (with the pre-laying of proper reinforcing) concrete is poured on-site, creating a base footing dimensioned according to static calculation. If defined to be carried vertically through rainwater pipes in the very pillars, on the collars are left outlet openings for rainwater. Depending on the load that needs to be carried and the cross-section of the pillars, three types of collars are made: S, M, XL according to the characteristics shown in the table below.It is possible to produce double collars, as well as prefabricated concrete loading ramps.

Transport

Za podizanje i pomeranje prefabrikovane čašice prilikom izrade čašica ostavljaju se otvori u zidovima čašice kroz koje se postavlja metalna šipka za koju se kače užad. Pozicioniranje je olakšano prisustvom zareza na zidu koji označava centar na samoj čašici.

Transport

For lifting and moving of prefabricated collars, what is usually done during fabrication process is leaving the openings in the walls of the collar, through which is later on placed metal rod which can be used to hang the ropes. Positioning is facilitated by the presence of notch on the wall that marks the center of the collars itself.

Montaža

Osnova stuba se postavlja na gornju površinu temeljne stope, nakon provere vertikalnosti i proveravanja cevi za odvod kišnice. Prostor između stuba i čašice popunjava se betonom odgovarajuće čvrstoće čime se postiže njihov zajednički rad u statičkom smislu.

Montage

Collars is placed on the top surface of the footings, after checking the verticality and alignment tube for drainage of rainwater. The space between the column and collar is filled with concrete of adequate strength which enables them to work together in static terms.
Čašice